Reviews of a plasma cutters

plasma cutters 1Plasma cutters are often used in fabrication and for welding purposes. The basic plasma cutting process is primarily based on cutting by using ionized gas. It is an effective means of cutting items that are both thick as well as thin. Automobile repairs and restoration processes are pretty dependent on these devices.

However, people often end up confused when they look to buy a plasma cutter, as there are many things to be taken into consideration. Enlisted here, are the pros and cons of the best plasma cutter under 1000. The best plasma cutter models are Lotos LTP5000D 50Amp Non-touch Pilot Arc, the Ramsond CUT 50DX Amp Inverter Portable Air Plasma Cutter and LT500D Lotos LT5000D Air Inverter Plasma cutter.

Brief info about Lotos LTP5000D 50Amp Non-touch Pilot Arc

The compactness of the product allows one to handle the operation smoothly. The non-hazardous process of compressed air to cut stainless steel is very useful. The pilot arc torch fitted in it cuts brilliantly through rough painted and rusty surfaces. It is also attached with the PAPST advanced German cooling system, which gives the ample scope of cooling the device brilliantly. The IGBT Power Drive Matrix with Pilot is provided with it in an integrated way. This practical plasma cutter allows usage in multiple ways. 

Ramsond CUT 50DX Amp Inverter Portable Air Plasma Cutter

This device also comes with various useful features preinstalled in it, like automatic dual voltage frequency of 110/220v 50/60 Hz. Along with this, the integrated pressure gauge display, also offers the scope of using it freely. It is equipped with the digital display that provides the scope of checking the condition of the device properly.

The fully insulated foldable handle is easy to move and use in a proper way. It comes with German made cooling system that gives the opportunity to cool down the device and to channelize the excess heat produced during the cutting process. Light weight and easy mobility further adds to the plus points of this product. This newly designed device is really versatile and adaptable as per the needs of users. Professional uses are also totally possible with this device.

LT500D Lotos LT5000D Air Inverter Plasma Cutter

It also comes with the several qualities and which is suitable for the cutting of metals like stainless steel, copper, aluminum, etc. It also comes with the automatic dual voltage frequency. The dual voltage system is attached with an automatic mode, which means it can switch according to the power source, by itself. The easy mobility wins the minds of plenty of users.

Every coin has both ends. Likewise, every device also comes with certain cons too. Though the above-mentioned plasma cutters are really very useful and effective to work with, there are some negligible problems, like they loses little neatness when it comes to extreme thickness while cutting. All these three devices are specially designed, but spare parts are hard to get in the market.

There is other plasma cutters are available in the market, but the ones mentioned here are very much within the budget of any household. Also, you can easily order it online through

Leave a Reply