Category Archives: Tools & Equipment for Home

How to choose the best air purifier?

The air around you is not pure all the time. Different types of gases, dust, germs and smoke mix together to make the air impure. This impure and dirty air cannot be breathed in by you. An air purifier is needed when your house needs to have cleaned up air. All the health threatening air contaminants are eliminated by air purifier to make the air absolutely pure.

The best air purifier for smoke helps to remove the smoke of tobacco from your house and it is perfect for the patients who suffer from asthma and allergies.

A list of all kinds of air purifiers is given as follows –

Filters

Impure air is filtered by an air purifier with the help of a special complex filter attached inside it. 95% of the germs are removed by an air purifier with the aid of filters. These air purifiers have cooling/heating system. Synthetic fibres, cotton, foam or fiberglass are used to make these filters. These types of air filters are a bit costly. You have to change these filters after some time to ensure its 100% working capacity. All the bad odours and unhealthy bacteria will be eliminated by such air purifiers.

Ionizing Purifiers

Corona discharge, a certain technique, is used by ionizing purifiers. Positively charged protons, negatively charged electrons, atoms and ions are involved in this technique. It creates a small electric field and ionizes the dust and germs when they pass through the electric field. A negative or a positive charge will be gained by these germs while passing through the electric field. After becoming ionized, opposite charged particles are attracted and eliminated from the air by them.

 

HEPA filters

HEPA filters are actually High Efficiency Particulate Air Filters. Air purifiers that use HEPA filters are best for eliminating smoke and dust from your home. All the rules about the removal of unhealthy contaminants in the air as described by the Department of Energy are followed by air purifiers with HEPA filters.

 

 

Ozone Generators

Ozone GeneratorThis type of air purifier has similar features like that of ionizing purifier. The transformation of oxygen molecules into ozone is the little difference between these two air purifiers. Air will be disinfected and the entire room will be deodorized with the help of special features of ozone generators. This type of air purifier is one of the best devices available in the market.

 

 

UV Light

Ultraviolet radiations are used by UV light air purifiers. Different micro organisms like germs, bacteria and allergens are converted into sterile and harmless particles with the help of UV light. It eliminates all the harmful germs to protect your health.

Adsorbents

Adsorbent materials are contained by this type of air purifier. All kinds of smoke, smells and chemicals that are found inside your house are eliminated by adsorbents. Adsorption is a process that traps the unhealthy substances to ensure the good health of your family members. Active charcoal is an example of adsorbent.

Consider all the features of different types of air purifiers so that you can find the best air purifier for your family.

The guide for buying the best plasma cutter

buying plasma cutterEarlier, repairers used manual devices like cut-off wheels, saws and shears in order to cut metal items. But now, as technology is progressing, plasma cutters are taking the place of the old saws and blades for cutting through metal. The plasma cutter has really brought about a revolution in the fields of repairing, plumbing and manufacturing. These small but powerful tools can easily cut through any metal in a matter of seconds. They make the process of working on metals faster, efficient and more cost effective.

Nowadays, a plasma cutter has become a major tool for any handyman. Thus, you must know how important it is to buy the best one. However, it can get tricky to buy the best one in this market full of different brands. For this, you can read the detailed guide or you can read this shortened version if you want to save your time.

How will you cut?

Before buying a plasma cutter, you must first think about what type of metal you will cut. There are two different varieties of plasma cutters available. The first one is the handheld one, which has to be moved manually, and the second is the automatic variant, which is mechanized. However, some plasma cutters are available in the market which can do both things. You choice will depend completely upon your convenience of either using your hands for more control, or using the automatic function for more precision and faster cutting.

Mechanization Making lives Easier

Impact DriverEver had the experience of meddling with nuts and screws to loosen them? At those difficult times all you need is a device with greater torque and stronger force to untighten those corrosive jammed nuts and bolts which seem to be frozen. The one device which you need to handle those stubborn screws and bolts is the impact driver. As the name suggests, it provides a high impact performance and has both rotational and downward force which can be used to loosen or tighten tough screws and nuts. This device has gained much popularity among the mass due to its advantages and easy usage. Thus, more and more power tool manufacturers are analyzing the performance of existing impact tools to better its performance day by day and develop the best impact driver.

With technological advancement in the field of mechanics, the innovation of this tool has made lives much simpler. This driver is so powerful and simple that the work of a mechanic can be easily done by you at home. Its usage is not only limited to tightening or loosening of nuts and bolts. It can prove to be your best friend during the construction of a home workbench. This highly powerful tool sticks to you at all times due to its long lasting battery capacity, making sure that you use it to the fullest to accomplish your needs. The impact driver can make an impact on any material it is used on and transform it into a useful piece of work.

Top plasma cutters at affordable prices

plasma cuttersPlasma cutter is a tool intended for the process of plasma cutting. This procedure involves cutting all the way through electrically conductive materials using improved jet of hot plasma. Some of the classic materials which cut via this process are steel, brass, aluminium and copper. Plasma cutting is often used in fabricating and welding shops, scrapping and salvage operations, locomotive rebuilding and repair and also in manufacturing companies. Due to the high speed and accuracy, plasma cutting is extensively used in all industries starting from all large scale industries to small hobbyist shops.

There are many plasma cutters accessible in the market. Here is a list of some of the best plasma cutter.

  • Lotos LTP5000D 50 Amp Non-Touch Pilot Arc Plasma Cutter:

This particular plasma cutter is small in size and is also obtainable at a very cheap price. It mostly utilizes harmless air to slice stainless steel. It has pilot arc torch mechanism with the help of which the plasma cutter economically cuts any rusty or painted and irregular surfaces with negligible quantity of slag. The pilot arc torch is motorized by Robust Infineon by Siemens in order to function in an integrated way. It also has PAPST cooling system which is made in Germany. This cutter is said to be very practical as it is used for various purposes.

Reviews of a plasma cutters

plasma cutters 1Plasma cutters are often used in fabrication and for welding purposes. The basic plasma cutting process is primarily based on cutting by using ionized gas. It is an effective means of cutting items that are both thick as well as thin. Automobile repairs and restoration processes are pretty dependent on these devices.

However, people often end up confused when they look to buy a plasma cutter, as there are many things to be taken into consideration. Enlisted here, are the pros and cons of the best plasma cutter under 1000. The best plasma cutter models are Lotos LTP5000D 50Amp Non-touch Pilot Arc, the Ramsond CUT 50DX Amp Inverter Portable Air Plasma Cutter and LT500D Lotos LT5000D Air Inverter Plasma cutter.

Brief info about Lotos LTP5000D 50Amp Non-touch Pilot Arc

The compactness of the product allows one to handle the operation smoothly. The non-hazardous process of compressed air to cut stainless steel is very useful. The pilot arc torch fitted in it cuts brilliantly through rough painted and rusty surfaces. It is also attached with the PAPST advanced German cooling system, which gives the ample scope of cooling the device brilliantly. The IGBT Power Drive Matrix with Pilot is provided with it in an integrated way. This practical plasma cutter allows usage in multiple ways.